Electric convectors Roda. Electric convectors for heating
The official website of TM Roda heating equipment offers to buy electric convectors with mechanical and electronic control. The entire range of Roda equipment complies with European quality and safety standards.
Design features of TM Roda convectors
Household convection heaters - operate on the principle of air heating by natural circulation. Cold air in the room descends to the floor level, after which it is heated by the heating element and flows back into the room through technological openings in the convector body. For more efficient space heating, it is recommended to install convectors at a height of no more than 1 meter from the floor level. The heater can be mounted on a wall or installed on legs or active (movable) supports. Electric convectors have a high efficiency - up to 99%, which allows them to be used as the main source of heat in the room. Unlike gas boilers, electric heaters do not require the installation of a heating system, and can be used in rooms where gas supply is not provided.
The main advantages of Roda electric convectors
- Fast heating. Almost immediately after switching on, you will feel the influx of warm air into the room.
- High efficiency. Due to the natural convection of air, electricity is not consumed for the operation of fans and coolers, as in heat guns. All consumed electricity is converted into heat with an efficiency of up to 99%.
- Tape heating element. Provides efficient heating and does not dry the surrounding air.
- High mobility - the possibility of installing the convector on legs or movable supports with wheels.
- Flexible setting. All models of electric convectors Roda contain a convenient control that allows you to accurately adjust the desired temperature in the room.
According to their design features, convection heaters can be divided into the following groups:
- By power: 1000, 1500, 2000, 2500 watts. Power should be selected based on the area of \u200b\u200bthe heated room. With a standard ceiling height, it is generally accepted that 1000 W is enough to heat 10 sq.m. area.
- By the presence of supports (legs). Wall type, floor type with passive supports, floor type with active (movable) supports.
- With electronic controller or mechanical control .
- By the presence of a regulating thermostat. Models with a thermostat allow you to most accurately maintain the desired temperature in the room.
- By the presence of temperature indication.
- According to the type of external surface: enameled and with a tempered glass surface.
You can buy an electric convector Roda on the official website of the heating equipment RODA - by calling the hotline or placing an order through the basket.
Convectors
TM RODA convectors are produced in capacities from 0.5 kW to 2.5 kW, where 1 kW is designed to heat an area of 10 sq.m. But along with this, it would be reasonable to take into account the material and thickness of the walls, the height of the ceilings, the number of windows and doorways. For a more accurate selection of a convector for your room, we recommend contacting qualified specialists from manufacturers.
The methods by which the convector is adjusted are carried out in two ways:
- Mechanical way - Mechanical convectors . It is considered inexpensive and practical, temperature control with a deviation of one or two degrees.
- Electronic method - Electronic convectors . More precise temperature control. Can be programmed to automatically turn off after reaching the set temperature. Such convectors are more modern, but more expensive.
Electric convectors have a maximum efficiency of 90%. All consumed electricity is converted into heat. The convector is one of the most economical types of equipment.
Electric convectors have a maximum efficiency (coefficient of performance) - from 90%. All consumed electricity is converted into heat. Heat spreads throughout the room and heats it up as quickly as possible.
Which convectors are the most economical ? An electric convector is one of the most economical types of equipment.
Often people are frightened by the sounds that an electric convector makes during its operation. In most cases, there is nothing to worry about. If an electric convector cracks , then the main reason may be overheating of the metal and deformation of the body due to this. The same sounds are heard when it is cooled.
The second reason may be the heating element, which makes quiet but unpleasant sounds. In this case, you need to solve the problem by contacting service specialists.
