Delta HE55-32-180 - DHW circulation pump
Description Delta HE55-32-180 - DHW circulation pump
Features of circulation pumps Roda Delta HE 35-55:
- Model range of 3 modifications
- Mounting height 130-180 mm
- Head from 4 m to 6 m, capacity up to 3.2 m3/h
- 3 constant speed characteristics
- 4 proportional pressure characteristics
- The snail of the pump is made of cast iron and coated with anti-corrosion cataphoresis varnish
- Stator ring made of chrome-nickel steel
- Permanent magnet rotor in stainless steel sheath
- Rotor wheel made of technical polymer
- Ceramic shaft and bearings
- Night drop function
- Selected characteristic indication
- Power consumption indication
- Can be used on Solar systems
- Housing insulation included
Energy-saving circulation pumps , thanks to which energy consumption can be reduced by 80% compared to traditional circulation pumps. Delta HE 35-55 meet the benchmark for the most energy efficient circulator EEI <= 0.20.
With "One Touch" support, seven different power characteristics can be selected: four according to the principle of proportional pressure, three with a constant speed and a night temperature drop function.
The LED display shows the current power consumption, the selected characteristics and the night temperature drop function.
The task of the pump is to pump the coolant from the heat supply or cooling generator (boilers, heat pumps, solar systems, etc.) to the closers (radiators, fan coil units, underfloor heating, etc.).
They provide the following benefits:
- increase the overall efficiency of the system through electronic regulation;
- reduce system power consumption;
- significantly increase the service life of heat generators;
- protect the system from overheating and boiling;
- increase the comfort of using thermal systems.
Serial modifications:
Series HE 25-35-130 – threaded circulation pump, mounting height 130 mm, maximum flow rate Q=2.6m³/h, maximum system resistance H=4m, used in small heating systems such as: DHW boiler heating, collector groups warm floors, etc.
Series HE 25-55-130 – threaded circulation pump, installation height 130 mm, maximum flow Q=3.2m³/h, maximum system resistance H=6m, used in all heating and cooling systems, installed in places with limited space .
Series HE 32-55-180 – threaded circulation pumps , mounting height 180 mm, maximum flow rate Q=3.2m³/h, maximum system resistance H=6m, used in all heating and cooling systems.
The maximum operating temperature of the heat carrier is 110°С, the minimum operating temperature is +5°С, the maximum operating pressure in the vessel is 10 bar, the connection of pumps DN 25, DN 32.

Application area:

Specifications:

Tags: Circulation energy-saving pump for sist.otop. Delta HE55-32-180
Characteristics Delta HE55-32-180 - DHW circulation pump
| Characteristics | |
|---|---|
| Working temperature min\max C | +5...+110 |
| Maximum working vice, bar | 10 |
| Weight, kg | 2.4 |
| Pumps | |
| Mounting height, mm | 180 |
| Maximum pump pressure, m | 6 |
| Power consumption, W | 3-38 |
| Degree of protection | IP 42 |
| Shut-off valves | |
| thread type | DN 25, DN 32 |
| Product information | |
| # | 1652 |


