RODA Palladium 120

RODA Palladium 120 - new storage water heaters - are a combination of reliability, quality and elegant appearance. These water heaters will be an excellent solution for consumers who want a modern appliance that meets the highest criteria for heating efficiency and economy. Two tubular dry heating elements - heating elements, located in special enameled casings, are responsible for the heating efficiency. This design allows you to increase the heating area and prevents contact of the heating elements with water, which reduces the formation of scale, the water is heated faster, and the heating elements themselves last much longer. In addition, dry heating elements have an undeniable advantage - easy replacement of heaters without the need to drain the water from the boiler. The duplication of heating elements also aims to increase the reliability of the device, even if one of the heaters fails, the second one can continue to work, and you will not be left without hot water.
The efficiency of the water heater is ensured by an increased thickness from 32 mm to 40 mm of highly efficient polyurethane foam insulation. This made it possible to achieve one of the lowest energy losses in the class - from 0.68 kWh / day.
Zirconium enamel reliably protects the material of the tank from contact with water and protects it from corrosion. Additional tank protection is provided by two magnesium anodes of increased cross section. The anode protection control system - "Anode Tester" visually signals the owner of the device about the decrease in the protective properties of the anode and the need to replace it.

Main advantages of RODA Palladium 120:

• Electronic control panel
• Indication of water temperature
• Delay start function
• Thermal insulation from 32 mm!
• Seven water heater protection systems:

1. overheat protection
2. Overpressure protection
3. Boiler empty protection
4. Heating element protection
5. Corrosion protection
6. Frost protection
7. Anode tank protection

• Anode protection control system – anode tester