Buffer tank RODA RBLS-1000

Features of the buffer tank Roda RBLS-1000:

• - A wide range of 5 modifications.
• - Produced in capacities from 350 liters to 10,000 liters.
• - Made of high quality cold rolled steel from 3 mm.
• - 100 mm thermal insulation made of flexible polyurethane foam.
• - Decorative protective cover made of artificial leather.
• - There are models with built-in heat exchangers.
• - Increase the efficiency of solid fuel boilers and heat pumps.
• - Prevent overheating of the heating system.
• - Allow hydraulic and thermal decoupling of the heat generation and distribution circuit.
• - Extend the life of the boiler and reduce the frequency of boiler cleaning.
• - Increase the inter-furnace interval of solid fuel boilers.
• - Save fuel.

The RODA buffer tank is the heart of the heating system. It allows you to accumulate heat from several sources and then conveniently distribute it to different temperature zones of the heating system. When using solid fuel boilers, RODA buffer tanks are a necessary component of the system.

They provide the following benefits:

- reduce the formation of soot, tar and condensate during the combustion of solid fuels;
- reduce the frequency of cleaning the boiler and chimney;
- increase the overall efficiency of the system and reduce the consumption of solid fuel during the heating season;
- significantly increase the service life of the boiler;
- protect the system from overheating and boiling;
- protect the boiler from low-temperature corrosion and thermal shock;
- stretch the interval between furnaces without damage to the boiler;
- link several heat sources into one system;
- to provide water heating for domestic hot water when using the RBTS or RBDS model;
- ensure easy connection of solar collectors or heat pumps for heating the heating system;
- apply multi-zone heating with different temperatures of the coolant (radiators and underfloor heating) and climate control.

Serial modifications:

The RBE series is an economy segment of buffer tanks, they have one common supply pipe and one common return pipe, as well as pipes for connecting thermometers and heating elements.
The RBB series is the basic series of buffer tanks, I have two branch pipes for the supply and return of the coolant.
The RBLS series are buffer tanks with a carbon steel bottom coil installed for connecting heat pumps or solar collectors.
The RBTS series are buffer tanks fitted with a stainless steel overhead coil for domestic hot water production.
The RBDS series are buffer tanks with two coils - top stainless steel and bottom carbon steel.

The maximum working temperature of the tanks is 100°C and the maximum working pressure in the tank is 3 bar, in the coils - 6 bar. On request, buffer tanks can be supplied with an installed inspection flange with a diameter of 150 mm.