Roda CS0200FHSS

Combined indirect heating tanks are a fundamental element for the preparation of hot water from various sources of heat supply (gas, electric, solid fuel boilers, solar energy, electricity, etc.).

They provide the following benefits:

- increase the supply of hot water for peak loads;

- organize a hot water recirculation system;

- save on operating costs for providing hot water supply using various sources of heat supply;

- improve the comfort of using the DHW system.

Serial modifications:

The CS0100WHS-CS0200WHS series is a combined indirect heating tank with one heat exchanger. It has a built-in electric heating element 3 kW, magnesium anode, an additional output for a sensor or a recirculation system.

The CS0100WHD-CS0200WHD series is a combined indirect heated tank with two heat exchangers. It has a built-in electric heating element 3 kW, magnesium anode, an additional output for a sensor or a recirculation system.

The CS0150FHS-CS0300FHS series is a combined indirect heating floor tank in a metal casing with one heat exchanger. It has several additional outlets for sensors or thermostats, as well as a separate outlet for organizing a recirculation system. It is possible to install an additional electric heater.

The CS0150FHD-CS0300FHD series is a combined indirect heating floor tank in a metal casing with two heat exchangers. It has several additional outlets for sensors or thermostats, as well as a separate outlet for organizing a recirculation system. It is possible to install an additional electric heater.

The CS0500FSS-CS1000FSS series is a combined indirect heating floor tank in a polyurethane foam casing with one heat exchanger. It has several additional outlets for sensors or thermostats, as well as a separate outlet for organizing a recirculation system. It is possible to install an additional electric heater.

The CS0500FSD-CS1000FSD series is a combined indirect heating floor tank in a polyurethane foam casing with two heat exchangers. It has several additional outlets for sensors or thermostats, as well as a separate outlet for organizing a recirculation system. It is possible to install an additional electric heater.

Connection options:

1. Depending on the model, tanks can be connected using various heat supply sources.

Peculiarities:

1. Model range of 6 modifications.

2. Volume 100-1000 l (under the order of 2000 l).

3. With one or two heat exchangers for different sources of heat supply.

4. Insulation up to 100 mm.

5. The inside is covered with enamel.

6. A magnesium anode is installed to protect the electric heater from scale.

7. Accelerated heating by an electric heater with a power of 3-12 kW.